3 Air Conditioner Repair Tips You Can Easily Follow
If your AC unit has problems, you can do a few things to ensure it’s working properly. The first thing to do is to turn off the power to the condenser unit. After that, check for any signs of overheating, such as burned or melted insulation on the wires. You can also test the capacitors and wires with an electrical test meter to ensure they’re not corroded. Here are some useful tips that will help your AC repair in Sharjah.
Change the air filter:
The air filter is one of the first things to check when repairing an air conditioner. Though it may appear clean outside, it may still be clogged with dust and dirt. It can also harm the system if left in place for too long. Luckily, you can take a few steps to clean the air filter.
First, remove the old air filter. It should be whitish or greyish. The new one should have arrows on its edge. The arrows should point in the same direction as the airflow in the HVAC system. Then, place the new filter in the air return duct opening.
Check the condenser fan motor:
To test the condenser fan motor, turn on your air conditioner and look for any sign that it is not spinning. You should also check for any signs of a jammed fan blade. A loose or worn bearing usually causes a jammed fan or may have become jammed due to some external event. You can also try to kickstart the fan by manually moving the fan blades. If you cannot kickstart the fan, the problem will likely be with the capacitor or motor.
A loose wire or a short in the windings of the fan motor can cause the fan to run intermittently. This could signify that a loose connection has caused the fan to overheat. You should contact an air conditioning repair professional to troubleshoot these issues. Another sign that the condenser fan is not functioning properly is a loud noise. This could indicate a problem with the fan motor or the condenser.
Check the thermostat:
To do a thermostat check, ensure the electrical panel has been turned off, and no power is going to the thermostat. This way, you can test it without risking injury. Next, use a household thermometer to measure the temperature in the room. If the temperature matches, the thermostat is working properly. If not, the thermostat might need maintenance.